GX-2 allows you to connect up to three instruments. Two GK and one regular.
Switch instrument with just a stomp and keep focusing on the next song. The GX-2 will take care of normalizing the difference in guitar volume. Hex pickups as well as the regular guitar pickup
Option 1. Each individual guitar may have their separate string levels (and regular pickup) programmed into the unit to normalize their differencies in volume.
Option 2.Connect MIDI cable to your GK synth(s) to automatically switch between pre-programmed GK-Settings.
Connect up to two synth units (i.e. SY-1000, GR-55, GP-10 etc) with instant silent all-string mute. In contrary to other Unit Selectors the GX-2 mutes even if GK Volume knob is assigned to something else than volume.
Note: All other GK Unit selectors on the market only mute by setting the GK Volume signal to 0 Volts, this unit does it the proper way.
Combine the built-in analog modulators effects, semi-arpeggiators, envelopers or sustainer with any existing sound of your GK-Units. Modulate volumes between the strings or between the GK Synth units. The unit hosts up to 99 effect patches.
The GX-2F (for Piezo Guitars) includes an analog Subsonic Filter board for enhanced tracking with Piezo pickups for synthesizers like Roland GR-55/VG-99(B) and older. This filter has virtually no effect with GK-Pickups/GP-10/SY-1000 and Godin Guitars with latest RMC boards.
Amplify individual weak string pickups to catch up with the rest or tame very "hot" pickups. Master gain settings as well as individual string settings. There's also gain settings for the regular pickup. All gain settings are individual programmed for each guitar input.
The GX-2 will lock to incoming MIDI CLOCK and keep the internal engine as well as your output devices syncronized to the beat.
If used without incoming MIDI CLOCK yo may use the TAP TEMPO button to set the speed of the internal engine as well as units connected to the two MIDI OUT connectors.
The GX-2 incorporates two very low noise (4 and 16 uVRMS) DC linear LDO voltage regulators from Texas Instruments, supplying your polyphonic guitars with ultralow-noise voltage without ANY current drawn from the connected Synth Units. GX-2 power up your guitars regardless if a GK synth is connected or not.
It however require a low-noise 9VDC Power Supply (not supplied) rated >=0.5A. We recomend NUX ACD-006A or a BOSS PSA adapter.
Each patch has the effect blocks: SUSTAINER, MODULATION1, MODULATION2, ARPEGGIATOR1, ARPEGGIATOR2, ENVELOPER1, ENVELOPER2 and DIVIDER.
Each patch may also contain individual patch-specific assigns for GK Volume, GK S1/S2, CTRL1, CTRL2 inputs and MIDI controls.
Works with any 13-pin device on the market. You may put additional GK pedals before or after the GX-2.
GX-2 firmware may be updated using the GX-2 Windows Assistant Windows PC software, or the MacOS/Windows Gumtown GearGrinder Editor.
These softwares also allows you to Backup/Restore all settings. Backup is recommended before updating firmware.
You will also need a USB cable.
Here you will find all of the manuals needed for the GX-2Download GX-2 Reference Manual V2.4 (ENGLISH)
The quick guide is only two pagesDownload GX-2 Quick Guide (ENGLISH)